DIY Microhybrid Motor

DIY Microhybrid Motor

From the DIY kit to DIY Materials and Plans


Allen Key

Allen Key

Allen Key to fit initiating bolt..

£0.86 Ex Tax: £0.86

Aluminium Rod

Aluminium Rod

1"(2.54cm) of 3/4"(1.905cm) Diameter aluminium rod..

£1.05 Ex Tax: £1.05

Aluminium Tube

Aluminium Tube

6.4"(16.3cm) of 7/8"(2.2225cm) diameter aluminium tube..

£4.80 Ex Tax: £4.80

Brass Rod

Brass Rod

1" (2.54cm) brass Rod for injectors..

£1.10 Ex Tax: £1.10

External circlip

External circlip

External circlip to fit Microhybrid motor body, used as a thrust ring on the motor...

£0.40 Ex Tax: £0.40

Graphite Rod

Graphite Rod

0.67" (1. 7cm) Graphite for Nozzle for the MicroHybrid..

£5.30 Ex Tax: £5.30

Initiator Bolt

Initiator Bolt

Initiator Bolt for the Microhybrid, makes use of Hex Key / Alan Key to tighten and used in conjuncti..

£1.00 Ex Tax: £1.00

Internal Circlip

Internal Circlip

Internal Circlip for the Microhybrid..

£0.35 Ex Tax: £0.35

Large O Ring

Large O Ring

Large Nitrile O Ring to seal both ends of fuel grain on the Microhybrid motor..

£0.14 Ex Tax: £0.14

Raw Materials Kit

Raw Materials Kit

Raw materials Kit You will need access to a Lathe to make the motor components. This is just th..

£18.40 Ex Tax: £18.40

Set of Plans

Set of Plans

Complete set of Roy Trzeciak-Hicks's metric plans and Complete set of Rene Calderas imperial plans..

£4.60 Ex Tax: £4.60

Small O Ring

Small O Ring

Small O Ring for Microhybrid injector seal..

£0.13 Ex Tax: £0.13

T-Nut

T-Nut

T-Nut pre-sized to fit the microhybrid..

£1.50 Ex Tax: £1.50

Showing 1 to 13 of 13 (1 Pages)